Posted: 24 Oct 2024 15:22 by risofort
Last edit: 26 Oct 2024 05:53 by risofort
In this tutorial, you'll be guided through the necessary steps to replace a broken gear powered by the Thermal Pressure Motor (error message on screen: T19-208 or T19-XXX) — the process shown here should work on all 2-drum machines but was performed on a MZ1070.
This gear wears out quite quickly, so it's very unusual that this happens. You can get replacement gears easily on sites like AliExpress for little money (search for the part #612-10010) — make sure to have it at hand before you open everything up!
Estimated time it takes: 1,5h
Posted: 14 Jun 2022 08:45 by risofort
Last edit: 14 Jun 2022 08:57 by risofort
[Disclaimer: This tutorial has been tested on MZ and ME machines but will most likely also work with MF/MH models]
Posted: 09 Apr 2020 14:49 by danschmahl
Last edit: 09 Apr 2020 15:01 by danschmahl
Here is a tutorial on how to realign a Master Making Unit on a MZ790. You might need to do this if you are getting errors when making masters, resulting in having to manually remove masters from your drums.
