|
|
| Line 4: |
Line 4: |
| |series_type=All | | |series_type=All |
| }} | | }} |
| {{Blueprint|Notes on feeding + printing methods for sending folded sheets through the riso so that larger paper sizes can be used. [[User:BearBear]] posted about this recently with the following:<blockquote>We printed on 25x19 folded to 12.5x19 using 100#T Cougar. No tape needed (we printed on MZ10). | | {{Blueprint|Notes on feeding + printing methods for sending folded sheets through the riso so that larger paper sizes can be used.}} |
| | |
| We started printing the top side first with the fold facing the user.
| |
| | |
| Sending files for mastermaking are set as 11x17 in print dialog even if the file itself has larger dimensions. The artwork should be centered and be within the max print area for your machine, which should be shown in the preview box during print setup. Our file ended up being two 12.5x19 PDF pages for 25x19 paper.
| |
| | |
| The paper size needs to be set on riso’s interface during printing. Admin > System > Register on interface.
| |
| It is likely set in mm, so 318 x 483mm for 12.5x19.
| |
| | |
| Open the riso's paper guide wings all the way out and shift the stack away from you (toward the wall), this way we can adjust the position of the print template to hit the fold edge of the paper. You can use a magnet or block to hold the other side of the stack in place.
| |
| | |
| For print position (arrow buttons), you’ll likely click position almost all the way down to hit the fold edge. You likely won’t be able to horizontally center it for 19”, but do try to go as far as possible. We ended up trimming at the end to mitigate the uneven margins. I think it ended up being closer to 18 but I have to check.
| |
| | |
| For printing the bottom half, the fold is facing away from you and the paper stack is shifted toward you. Print position goes upward.
| |
| | |
| A2 size wouldn’t require trimming and possibly wouldn’t need the paper shifting either (16.5x23.3), folded A2 size would be set at 297x420mm. An easier option!</blockquote>}}
| |
