Maintenance toolkit: Difference between revisions
Robertbaxter (talk | contribs) (→Tools) |
Robertbaxter (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
! Item !! Notes | ! Item !! Notes | ||
|- | |- | ||
| JIS Phillips #2 screwdriver || The screws in a risograph conform to the Japanese Industrial Standard (JIS), not ANSI (used in the US), or ISO (used in Europe).<ref>https://en.wikipedia.org/wiki/List_of_screw_drives#JIS_B_1012</ref> Using a proper JIS screwdriver will provide more torque to stuck screws, and make it less likely that screws become stripped.<p>A good option for this product is the: [https://crawfordtool.com/products/vessel-220-p2-150-phillips-2-x-6-blade-o-a-l-10-magnetic-ball-grip-screwdriver-great-for-japanese-industrial-standard-jis-screws Vessel 220 P2 150]</p> | | JIS Phillips #2 screwdriver || <p>The screws in a risograph conform to the Japanese Industrial Standard (JIS), not ANSI (used in the US), or ISO (used in Europe).<ref>https://en.wikipedia.org/wiki/List_of_screw_drives#JIS_B_1012</ref> Using a proper JIS screwdriver will provide more torque to stuck screws, and make it less likely that screws become stripped.</p><p>A good option for this product is the: [https://crawfordtool.com/products/vessel-220-p2-150-phillips-2-x-6-blade-o-a-l-10-magnetic-ball-grip-screwdriver-great-for-japanese-industrial-standard-jis-screws Vessel 220 P2 150]</p> | ||
|- | |- | ||
| Metric hex keys || These should be separate L-shaped wrenches, not part of a | | Metric hex keys || These should be separate L-shaped wrenches, not part of a pocket knife-style connected set. The sizes needed are: 5, 4, 3, 2.5, 2, and 1.5 mm. | ||
|- | |- | ||
| Small flat head screwdriver || Primarily for removing [[E-ring|e-rings]]—a thin, strong blade is important. A small butter knife or type tweezers for letterpress make good substitutes. | | Small flat head screwdriver || Primarily for removing [[E-ring|e-rings]]—a thin, strong blade is important. A small butter knife or type tweezers for letterpress make good substitutes. | ||
| Line 29: | Line 29: | ||
|- | |- | ||
| Bristle brushes (nylon & brass) || For cleaning old grit and grease off of hard plastic and metal surfaces respectively. | | Bristle brushes (nylon & brass) || For cleaning old grit and grease off of hard plastic and metal surfaces respectively. | ||
|- | |||
! colspan="2" | ''Optional tools'' | |||
|- | |||
| Metric feeler gauge | For adjusting the squeegee gap and squeegee pressure in drums, and the G-lever mounting position in {{Zplus}} machines. For drum maintenance this should have leaves of 0.05, 0.06, 0.07, 0.08, 0.09, 0.10 mm. For the G-lever adjustment additional leaves of 0.15, 0.20, 0.25, and 0.30 will be useful.<p>''Note that an imperial gauge with mm conversions marked on it will not have high enough fidelity to make these calibrations.''</p>Recommended product: [https://www.mcmaster.com/2334A66/ McMaster Carr Feeler Gauge Set 2334A66]<p> | |||
|} | |} | ||
{{References}} | {{References}} | ||
Revision as of 14:08, 24 November 2025
A toolkit of a few key items will allow most standards repairs on all models of risograph.
Tools
| Item | Notes |
|---|---|
| JIS Phillips #2 screwdriver | The screws in a risograph conform to the Japanese Industrial Standard (JIS), not ANSI (used in the US), or ISO (used in Europe).[1] Using a proper JIS screwdriver will provide more torque to stuck screws, and make it less likely that screws become stripped. A good option for this product is the: Vessel 220 P2 150 |
| Metric hex keys | These should be separate L-shaped wrenches, not part of a pocket knife-style connected set. The sizes needed are: 5, 4, 3, 2.5, 2, and 1.5 mm. |
| Small flat head screwdriver | Primarily for removing e-rings—a thin, strong blade is important. A small butter knife or type tweezers for letterpress make good substitutes. |
| Needle nose pliers | For reattaching e-rings, and manipulating light springs. |
| 5.5 mm socket wrench, crescent wrench, and/or nut driver | Many internal screws in the risograph have an external hex head profile of 5.5 mm. A small adjustable wrench will also do. |
| Small vice grips | For removing stuck screws. |
| Ruler (mm) and/or calipers | Mechanical calibrations for the risograph are invariably provided in metric. |
| Small flashlight | A magnetic flashlight is best; a headlamp or bike light will also do. |
| Fine point sharpie | For marking adjustable plates/screws before and after adjustment, or making notes inside the risograph. |
| Magnet or magnetic retrieval tool | For retrieving dropped screws and other parts. |
| Bristle brushes (nylon & brass) | For cleaning old grit and grease off of hard plastic and metal surfaces respectively. |
| Optional tools | |
| For adjusting the squeegee gap and squeegee pressure in drums, and the G-lever mounting position in Z+Any machine released with or after the RZ line, i.e. RZ/RV/EZ/EV/SF/SE and MZ/ME/MF/MH machines. machines. For drum maintenance this should have leaves of 0.05, 0.06, 0.07, 0.08, 0.09, 0.10 mm. For the G-lever adjustment additional leaves of 0.15, 0.20, 0.25, and 0.30 will be useful. Note that an imperial gauge with mm conversions marked on it will not have high enough fidelity to make these calibrations. Recommended product: McMaster Carr Feeler Gauge Set 2334A66
| |