Drum repair (Z+)

This is the draft of an article, it is incomplete or in-progress.

You can help by contributing to missing sections, editing existing material, or helping to migrate this page from linked sources.

This article is awaiting migration from either the old wiki or elsewhere. Its sources (including archived versions of the original pages) are available here:

1. How to: clean an MZ/EZ/RZ drum to change colors

You can help by rewriting the linked articles into wiki format for this page (preserving them as sources using <ref>...</ref> tags) and then removing this message. Migration notes may be available on the wiki roadmap.

Drum repair (Z+)
Difficulty	Expert
Duration	½–3 hours
For series	Z+Any machine released with or after the RZ line, i.e. RZ/RV/EZ/EV/SF/SE and MZ/ME/MF/MH machines.
Tools	JIS phillips #2 screwdriver 4 in (100 mm) zip ties Clear packing tape Doublestick tape Solvent OMS Isopropyl alcohol Gloves Rags

There are many reasons a drum may need to be opened—to repair an issue, clean out old ink, transition to a new color, etc. This article outlines the common processes in disassembly, testing/cleaning, and reassembly, but does not outline specific maintenance (i.e. correcting the squeegee gap, etc.)—those are separated out into their own tutorials.

The golden rule of drum repair is: only go as far as necessary, and no further. Drum repair is inherently dangerous to the riso. Misassembling a drum and trying to print with it can result in totalling the drum and damaging the riso itself; many of the individual components in the drum are quite delicate; the process is arduous. So doing as little as possible on drums is a good way of limiting the potential for error.