This is the draft of an article, it is incomplete or in-progress.
You can help by contributing to missing sections, editing existing material, or helping to migrate this page from linked sources.
Shock absorber replacement: Difference between revisions
Robertbaxter (talk | contribs) No edit summary |
Robertbaxter (talk | contribs) No edit summary |
||
| Line 10: | Line 10: | ||
|part_number=046-15009 | |part_number=046-15009 | ||
|part_name=Shock absorber | |part_name=Shock absorber | ||
|part_qty=1 | |||
}}{{Tutorial/part | |||
|part_number=046-15008 | |||
|part_name=Shock absorber bracket (if not already installed) | |||
|part_qty=1 | |part_qty=1 | ||
}} | }} | ||
Revision as of 22:47, 27 February 2026
| Shock absorber replacement | |
|---|---|
| Difficulty | Expert |
| Duration | 60 minutes |
| For series | Some one-drum Z+Any machine released with or after the RZ line, i.e. RZ/RV/EZ/EV/SF/SE and MZ/ME/MF/MH machines. machines |
| Tools | JIS phillips #2 screwdriver Metric hex wrenches |
| Parts | 046-15009 1 × Shock absorber046-15008 1 × Shock absorber bracket (if not already installed) |
On some models of one-drum Z+Any machine released with or after the RZ line, i.e. RZ/RV/EZ/EV/SF/SE and MZ/ME/MF/MH machines. machines, a small black rubber shock absorber helps soften the impact of the pressure lever (used to move the pressure roller up and down for each rotation of the drum. Over time, the shock absorber wears down—when it is fully deteriorated the riso can no longer be used for printing. The symptoms of this issue are different depending on if the pressure roller is stuck in the up position or the down position.
- If the pressure roller is stuck in the down position, pages will feed partially into the riso, making it into the area above or just past the pressure roller, where they will halt and trigger a paper jam. These pages were never pressed onto the surface of the drum, so they will have no image printed on them.
- If the pressure roller is stuck in the up position, pages will come out over inked, with ink spread across the whole back of the sheet and continuous ghosting on the front. Furthermore the drum will be difficult or impossible to remove, as the pressure roller will be dragging against it as it is pulled out of the risograph.
The shock absorber can be replaced, but it is a difficult task which involves partially disassembling the main drive of the risograph, in the back of the machine.